Skip to content
DCPL Technology
Shopify

How jewellery prices are calculated: gold rate, purity, making charges, wastage and GST

Gold rate, purity, making charges, wastage, stones and GST: how a jewellery price is built, with an illustrative worked example.

DTDCPL Team19 Nov 20266 min read
How jewellery prices are calculated: gold rate, purity, making charges, wastage and GST article cover
Filed underShopify
6 min read19 Nov 2026All field notes

Two jewellers in the same market quote different prices for chains of the same weight, and a customer reasonably asks why. For the jeweller, the question is just as real from the other side: is every price on the counter, in the catalogue and on the website built the same way, from today’s rate? Jewellery price calculation looks simple from outside, but it combines several components, and each one can be calculated, rounded or forgotten differently.

Selling online raises the stakes. A shop counter can recalculate a piece while the customer waits; a website shows a fixed number to everyone until someone changes it. This guide breaks down each component, works through an example, and explains how to keep online prices in step with the daily rate.

The basic jewellery price calculation formula

Most gold and silver jewellery prices are built from the same parts:

  • Metal value — net metal weight × the day’s rate × purity.
  • Wastage — an allowance for metal lost in manufacturing, charged as a percentage of weight.
  • Making charges — the labour and design cost, charged per gram or as a percentage.
  • Stone value — diamonds, coloured stones or pearls, priced separately.
  • GST — applied on the taxable value.

Some jewellers combine wastage and making into one figure, or call wastage “value addition”. The names vary by region and shop; the underlying parts do not.

Metal value: weight, rate and purity

Purity is what karat describes. Pure gold is 24 karat, so 22K jewellery is 22 parts gold out of 24, which is why it is often stamped 916 (91.6% gold). 18K is 75% gold, and 14K is 58.5%.

Jewellers usually work in one of two ways: take a 24K rate and multiply by purity, or use a published rate for 22K or 18K directly. Either is fine, as long as everyone in the business uses the same method and the same rate source. Mixing the two is a common reason one variant ends up priced differently from another.

Weight matters just as much. Use the net metal weight, not the gross weight of the finished piece. If a ring weighs 5 grams including stones, the stone weight must be subtracted before the metal is valued, or the customer pays the gold rate for the stones.

Making charges and wastage

Making charges cover labour and design. They are usually expressed either as a fixed amount per gram or as a percentage of metal value. A plain machine-made chain carries lower making charges than an intricate handmade piece, and making charges are often where a jeweller’s margin and brand positioning show.

Wastage is an allowance for metal lost while cutting, soldering and polishing. It is usually a percentage of the metal weight, valued at the day’s rate. Because it is tied to the rate, wastage rises and falls with gold prices just as the metal value does.

Stones and GST

Stones are priced on their own terms: diamonds by carat, quality and certificate; coloured stones and pearls by type and size. On a diamond piece, the stone value can be larger than the gold value, so it needs to be stored and updated separately rather than buried in the making charge.

GST is then added to the taxable value. How it applies to metal, making charges and old-gold exchange has specific rules, so confirm your treatment with your CA rather than relying on a general article like this one.

A worked example (illustrative numbers only)

The numbers below are round placeholders chosen to make the arithmetic easy to follow. They are not today’s rate, a typical making charge or a recommended margin.

Imagine a 22K gold pendant with a small stone:

  1. Net gold weight: 10 grams (after subtracting the stone).
  2. Rate: a placeholder 24K rate of ₹10,000 per gram.
  3. Metal value: 10 × 10,000 × 0.916 = ₹91,600.
  4. Wastage at a placeholder 5%: 0.5 grams × 10,000 × 0.916 = ₹4,580.
  5. Making charges at a placeholder ₹500 per gram: 10 × 500 = ₹5,000.
  6. Stone value: a placeholder ₹2,000.
  7. Price before tax: 91,600 + 4,580 + 5,000 + 2,000 = ₹1,03,180.
  8. GST: added at the applicable rate on the taxable value.

Now change only the rate. If the placeholder rate moves from ₹10,000 to ₹10,200, the metal value and wastage both change, and the price before tax becomes roughly ₹1,05,104 — about ₹1,924 more on one piece, from a single rate movement. Multiply that across a catalogue and the cost of a stale price becomes obvious.

Why manual price updates fail online

Every design on a website multiplies into variants: 14K, 18K and 22K; yellow, white and rose; several ring sizes or chain lengths, each with its own weight. A store with a modest catalogue can have far more variants to reprice than anyone wants to edit by hand each morning.

The usual failure points are predictable: one typo in a rate, a variant whose weight was never entered, a spreadsheet formula copied one row out of place, a forgotten update on a holiday, or a staff member using a different rate source. Our answer on how to avoid jewellery pricing mistakes and protect margins covers the controls that catch these. The core habits are one written formula, weights stored for every variant, and a review step before anything goes live.

How MetalIQ automates daily rate updates on Shopify

For jewellers selling on Shopify, we built MetalIQ to apply this calculation across a catalogue. You enter or fetch the day’s gold, silver or platinum rate once, and it recalculates existing metal, centre-stone-size and chain-length variants using each product’s weights, making charges, stone rates and your markup rules.

Every proposed price is shown beside the current one before it reaches the store. Increases outside a threshold you choose are held for approval, and a completed run can be undone, restoring the previous prices. Scheduled repricing is optional on eligible plans; manual review is always available. MetalIQ prices the variants you already have in Shopify rather than creating new product options.

If you only have a handful of products, a spreadsheet and CSV import may be enough; our short answer on how to update jewellery prices with the daily gold rate walks through both the manual and the automated route.

Why do two jewellers quote different prices for the same weight of gold?

Because only the metal value is close to standard. Making charges, wastage, the rate source and time of day, how stone weight is treated, and rounding all differ between jewellers. Compare quotes component by component, using net weight, rather than comparing the final figure alone.

If your pricing lives in a spreadsheet that only one person understands, the first step is writing down the formula you actually use. From there, you can see how we work with jewellery and gem businesses, install MetalIQ for your Shopify store, or talk to us about pricing rules that need more than an off-the-shelf app.

DT

DCPL Team

DCPL Technology · Surat, India

Share

Where ideas meet technology.

Have a product question worth unpacking?

Bring us the context. We’ll help make the next decision clearer.

Your next step

  1. 01Share your goals
  2. 02Clarify the right scope
  3. 03Plan the next practical step